Hotline: +49 (0)8191 985 9000|E-Mail: info@averde.de
LISTER / LISCOP LI A shearing knife series
The Lister shearing knives of the LI A series fit the following models from Lister:
PROFI LINE Horses + Cattle with shearing head type SK II
SUPER 3000
AIRCOOL II
Cuty
EQUI Clip Klassik
Dogli
Technical data LI A 2: Blade
set for horse and udder
shearing Upper blade: 24 teeth
Lower blade: 35 teeth Cutting
height approx. 3 mm Cutting
width approx. 75 mm
Care tips for clippers and clippers:
The clipping:
The animal's coat must be as clean, dry and not sweaty as possible. Dirt particles in the fur, such as sand, ensure that the shearing blades have a much
shorter service life.
During shearing, it is extremely important to oil the shearing blades and the eccentric (shearing head) every 10 minutes at the latest. Please use only special shearing machine oil for this purpose
. The lubricating film ensures a low-wear operation and cools the blades and shearing head at the same time.
Shearing blades that become too hot wear out much faster. Allow shearing blades that have become too hot to cool down.
The contact pressure (plate pressure) of the shearing blades must be perfectly adjusted (follow the operating instructions of the shearing machine). Too little
contact pressure results in a poor shearing pattern. If the contact pressure is too high, the extenter and shearing blades are stressed too much and run
hot. The wear increases.
After shearing:
After each shearing operation, the shearing blades should be cleaned with a soft brush and freed of fur residues and greasy coatings.
Lubricate the shearing blades completely (cut surfaces, back and edge) to prevent the formation of rust. Shearing blades are best stored in a sheath
in a dry place (not in the tack room).
After inserting the shearing blades into the shearing head, oil the blades again a little and let the shearing machine run idle
for about 10 seconds.
Scope of delivery: Shearing blade
set (upper and lower blades) LI A 2
| Item no. | Variant | Price | Delivery time | Variant | |
|---|---|---|---|---|---|
| AVSMLIA2 |
Schermesser: LI A2, 24/35 Zähne, 3 mm |
48,77 €
59,05 €
RRP
|
Delivery time 1-3 working days |
AVSMLIA2 Schermesser: LI A2, 24/35 Zähne, 3 mm Delivery time 1-3 working days 48,77 € 59,05 € RRP |
Add to cart |
| AVSMLIA6 |
Schermesser: LI A6, 24/18 Zähne, 3 mm |
48,57 €
59,05 €
RRP
|
Delivery time 1-3 working days |
AVSMLIA6 Schermesser: LI A6, 24/18 Zähne, 3 mm Delivery time 1-3 working days 48,57 € 59,05 € RRP |
Add to cart |
No special safety instructions are available.
No special documents are available.
LISTER / LISCOP LI A shearing knife series
The Lister shearing knives of the LI A series fit the following models from Lister:
PROFI LINE Horses + Cattle with shearing head type SK II
SUPER 3000
AIRCOOL II
Cuty
EQUI Clip Klassik
Dogli
Technical data LI A 2: Blade
set for horse and udder
shearing Upper blade: 24 teeth
Lower blade: 35 teeth Cutting
height approx. 3 mm Cutting
width approx. 75 mm
Care tips for clippers and clippers:
The clipping:
The animal's coat must be as clean, dry and not sweaty as possible. Dirt particles in the fur, such as sand, ensure that the shearing blades have a much
shorter service life.
During shearing, it is extremely important to oil the shearing blades and the eccentric (shearing head) every 10 minutes at the latest. Please use only special shearing machine oil for this purpose
. The lubricating film ensures a low-wear operation and cools the blades and shearing head at the same time.
Shearing blades that become too hot wear out much faster. Allow shearing blades that have become too hot to cool down.
The contact pressure (plate pressure) of the shearing blades must be perfectly adjusted (follow the operating instructions of the shearing machine). Too little
contact pressure results in a poor shearing pattern. If the contact pressure is too high, the extenter and shearing blades are stressed too much and run
hot. The wear increases.
After shearing:
After each shearing operation, the shearing blades should be cleaned with a soft brush and freed of fur residues and greasy coatings.
Lubricate the shearing blades completely (cut surfaces, back and edge) to prevent the formation of rust. Shearing blades are best stored in a sheath
in a dry place (not in the tack room).
After inserting the shearing blades into the shearing head, oil the blades again a little and let the shearing machine run idle
for about 10 seconds.
Scope of delivery: Shearing blade
set (upper and lower blades) LI A 2
| Item no. | Variant | Price | Delivery time | Variant | |
|---|---|---|---|---|---|
| AVSMLIA2 |
Schermesser: LI A2, 24/35 Zähne, 3 mm |
48,77 €
59,05 €
RRP
|
Delivery time 1-3 working days |
AVSMLIA2 Schermesser: LI A2, 24/35 Zähne, 3 mm Delivery time 1-3 working days 48,77 € 59,05 € RRP |
Add to cart |
| AVSMLIA6 |
Schermesser: LI A6, 24/18 Zähne, 3 mm |
48,57 €
59,05 €
RRP
|
Delivery time 1-3 working days |
AVSMLIA6 Schermesser: LI A6, 24/18 Zähne, 3 mm Delivery time 1-3 working days 48,57 € 59,05 € RRP |
Add to cart |
No special safety instructions are available.
No special documents are available.
