1. Home
  2. Schermaschinen
  3. Schermesser, Öl, Zubehör
  4. LISTER / LISCOP shearing knife LI A2 Cattle and horse shearing knife, cutting height approx. 3 mm
Hotline: +49 (0)8191 985 9000|E-Mail: info@averde.de
"
-10%
Lister

LISTER / LISCOP shearing knife LI A2 Cattle and horse shearing knife, cutting height approx. 3 mm

Item no.: VAR-SMLIA
LISTER / LISCOP shearing knife LI A6, cutting height approx. 3 mm LISTER / LISCOP shearing knife LI A6, cutting height approx. 3 mm LISTER / LISCOP shearing knife LI A6, cutting height approx. 3 mm LISTER / LISCOP shearing knife LI A6, cutting height approx. 3 mm LISTER / LISCOP shearing knife LI A6, cutting height approx. 3 mm
Lister
-10%
Lister

LISTER / LISCOP shearing knife LI A2 Cattle and horse shearing knife, cutting height approx. 3 mm

Item no.: VAR-SMLIA
48,57 € 55,90 €
You save 7,33 € = -13%
with payment in advance only 47,60 €
Weight: 0,16 KG
incl. VAT plus Shipping costs Depending on the delivery address, the VAT in the shopping cart may vary.
Delivery time 1-3 working days
Schermesser choose:
Would you like help over the phone?
Use our free callback service
  • Description
    LISTER / LISCOP LI A shearing knife series

    The Lister shearing knives of the LI A series fit the following models from Lister:

    PROFI LINE Horses + Cattle with shearing head type SK II
    SUPER 3000
    AIRCOOL II
    Cuty
    EQUI Clip Klassik
    Dogli


    Technical data LI A 2: Blade

    set for horse and udder

    shearing Upper blade: 24 teeth
    Lower blade: 35 teeth Cutting
    height approx. 3 mm Cutting
    width approx. 75 mm



    Care tips for clippers and clippers:

    The clipping:

    The animal's coat must be as clean, dry and not sweaty as possible. Dirt particles in the fur, such as sand, ensure that the shearing blades have a much
    shorter service life.

    During shearing, it is extremely important to oil the shearing blades and the eccentric (shearing head) every 10 minutes at the latest. Please use only special shearing machine oil for this purpose
    . The lubricating film ensures a low-wear operation and cools the blades and shearing head at the same time.
    Shearing blades that become too hot wear out much faster. Allow shearing blades that have become too hot to cool down.

    The contact pressure (plate pressure) of the shearing blades must be perfectly adjusted (follow the operating instructions of the shearing machine). Too little
    contact pressure results in a poor shearing pattern. If the contact pressure is too high, the extenter and shearing blades are stressed too much and run
    hot. The wear increases.


    After shearing:

    After each shearing operation, the shearing blades should be cleaned with a soft brush and freed of fur residues and greasy coatings.
    Lubricate the shearing blades completely (cut surfaces, back and edge) to prevent the formation of rust. Shearing blades are best stored in a sheath
    in a dry place (not in the tack room).
    After inserting the shearing blades into the shearing head, oil the blades again a little and let the shearing machine run idle
    for about 10 seconds.


    Scope of delivery: Shearing blade

    set (upper and lower blades) LI A 2

Description
LISTER / LISCOP LI A shearing knife series

The Lister shearing knives of the LI A series fit the following models from Lister:

PROFI LINE Horses + Cattle with shearing head type SK II
SUPER 3000
AIRCOOL II
Cuty
EQUI Clip Klassik
Dogli


Technical data LI A 2: Blade

set for horse and udder

shearing Upper blade: 24 teeth
Lower blade: 35 teeth Cutting
height approx. 3 mm Cutting
width approx. 75 mm



Care tips for clippers and clippers:

The clipping:

The animal's coat must be as clean, dry and not sweaty as possible. Dirt particles in the fur, such as sand, ensure that the shearing blades have a much
shorter service life.

During shearing, it is extremely important to oil the shearing blades and the eccentric (shearing head) every 10 minutes at the latest. Please use only special shearing machine oil for this purpose
. The lubricating film ensures a low-wear operation and cools the blades and shearing head at the same time.
Shearing blades that become too hot wear out much faster. Allow shearing blades that have become too hot to cool down.

The contact pressure (plate pressure) of the shearing blades must be perfectly adjusted (follow the operating instructions of the shearing machine). Too little
contact pressure results in a poor shearing pattern. If the contact pressure is too high, the extenter and shearing blades are stressed too much and run
hot. The wear increases.


After shearing:

After each shearing operation, the shearing blades should be cleaned with a soft brush and freed of fur residues and greasy coatings.
Lubricate the shearing blades completely (cut surfaces, back and edge) to prevent the formation of rust. Shearing blades are best stored in a sheath
in a dry place (not in the tack room).
After inserting the shearing blades into the shearing head, oil the blades again a little and let the shearing machine run idle
for about 10 seconds.


Scope of delivery: Shearing blade

set (upper and lower blades) LI A 2

Cookie Settings

We use different types of cookies to make our website better and smarter. These include cookies that are strictly necessary for the operation of the website, statistical cookies that help us better understand usage patterns, comfort cookies that allow us to offer various functions and services, and personalization cookies to provide you with content tailored to your interests.

Lauto law, we may store cookies on your device if they are strictly necessary for the operation of this website. For all other cookie types we need your permission. You may no longer be able to use all the functions of the website due to your settings.

Privacy policy
Legal notice